Most of the energy costs spent to keep a Steeles home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?
Are You Trying To Find Interior Wall Insulation Contractors For Your Steeles House?
Although spray foam insulation as we know it today truly emerged in the 1980s around the Steeles area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.
What is Insulation, Why Do We Have it and How Does it Work?
Insulation at home helps in saving energy and reducing utility bills. It makes the house more comfortable. Insulation at home not only helps in keeping the house cool in summer and warm in winter but it also prevents damage from leaking water and provides a good thermal resistance. Insulation is very useful to keep the temperature of the house as outdoor temperature.
By using insulation, the cost spent in cooling and heating the home can be reduced to a great extent. There should always be sufficient insulation at home to protect the house from air leakage, water leakage etc. R value, also known as thermal resistance is used to compute the insulation resistance. It shall be installed between the heated and unheated space.
There are many types of home insulation available. All insulation has pros and cons. They are mainly differentiated based on the material used for the insulation. They can be distinguished into Plastic foam, rigid board, reflective, loose fill, batts and blankets and blown in insulation etc. Batts and blankets insulation can be performed by the homeowner himself. No professional is required for this type of insulation. They are easily affordable and the material like blankets and batt strips are easily available in the market. Batts and Blankets insulation can be performed with the help of materials like Fiberglass, Mineral wool, plastic, concrete block, polystyrene fiber etc.
Insulation can be performed at home in attics, on ceilings, exterior walls and garages and storage areas for proper ventilation and thermal resistance. Insulation must be performed either by professionals or proper care must be taken while installing them. Air and water leaks must be thoroughly checked before installing the insulation as moisture can dampen the efficiency of insulation or insulation may mask them. It must be checked that electrical equipment and fixtures are not getting touched by the insulation. Also some insulation can cause allergies to the skin and may cause respiratory problems so proper care must be taken while installing them.
Your Home's Insulation
Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.
Most of the energy costs spent to keep a home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun's heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?
Insulation is rated by number denoting how much of a thermal barrier each type of insulation provides. The farther north one goes the higher insulation number needed. Cold weather states, such as the Atlantic north-east, mountain states, and northern Mid-west require an R-49 rating. Warm weather states in the middle latitudes call for R-40; Southern and Gulf States would require R-38.
These guidelines offer the answer to the question, "how much insulation is enough?"
Adequate home insulation is the best way to keep a home comfortable while saving energy costs. With just a ruler, any homeowner can determine if they are meeting their insulation needs. With many options available to increase the insulation in an attic, no homeowner has to needlessly suffer through a cold winter, hot summer, or high utility bills.