Most of the energy costs spent to keep a Bronte home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?
Are You Trying To Find Ceiling Insulation Contractor For Your Bronte House?
Although spray foam insulation as we know it today truly emerged in the 1980s around the Bronte area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.
Home Insulation - Choosing the Best Material for Your Home
Each and every home needs proper insulation, this is a fact. Fortunately, these days, it is a lot easier to find the proper material that would best fit the home's specific needs. After all, every house differs in terms of layout and need for heating. But first, let's talk about insulation. If your home is properly insulated, the heat flow to and out of your home is greatly reduced. This means that you need not use up too much energy in the colder months just to keep your home warm. Insulation is added to various areas in your home such as in between walls and even floors in order to make this happen. Of course, the material used also plays quite a significant role in making sure that the heat does not escape and as such, choosing the right one for your house is imperative.
2. Foam boards or rigid foam - These are commonly used to insulate the house's foundation because of the fact that it is resistant to water.
3. Liquid foam - A thin layer of this would be spread onto a wall and the left to expand and fill the cavity where it was applied before anything can be added on top.
So there you have it, the top 3 most common insulation materials for your home.
Spray Foam Insulation - Open and Closed Cell
Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.
An energy efficient home is an environmentally sound home and to achieve energy efficiency insulation is vital. It must be used liberally, and it must be properly installed. There are all sorts of insulating materials, and their green credentials may vary.
The most common is Pink fiberglass Batts which are by no means the worst from an environmental perspective but they aren't the best either. Fiberglass itself is chemically inert, but the glues and backing materials that provide structure to the batts can release dangerous fumes and there is some concern that minute particles of fiberglass can filter into living spaces, presenting a health risk. Rigid polystyrene panels, another popular choice, are made from petrochemicals which are flammable and emit toxic fumes when burned.
Misconceptions about Cellulose:
1: Prone to mold and insects; Cellulose Fiber is treated with two non-irritant, non-toxic, safe to handle allergy free agents; Borax and Boric acid which make it vermin resistant.
2: Fire retardant chemicals disappear in 5 years; The most exhaustive study and technical literature review concluded it would take 300 years to do so and only under continuous harsh conditions of 100% relative humidity and 70 degrees Celsius.
For information on environmentally friendly cellulose, go to www.premiuminstallation.com.au.