Toronto Radiant Insulation Companies

The main area of a home in Toronto  that can let in air from outside into your home is your attic. This is also the main place where insects and animals can infest without you noticing before it is too late. The best to prevent both of these problems is to have the proper sealing done in your attic. This will mainly involve insulating the entire area properly with the most advanced method of insulation that is available right now. The following is the best option of insulation for any type house that has an attic:

What's The Best Insulation For A House

CozyGuYYZ: Professional Barrier Insulation Contractor In Toronto

Foam insulation is a new type of insulation being used a lot in Toronto  that many builders and homeowners alike are beginning to use in replacement of lay-in insulation. Instead of stapling pieces of fiberglass-based traditional insulation, this type is completely sprayed onto the area which guarantees complete coverage. This is also very helpful when it comes to tight spaces that are hard to get to.

The History of Spray Foam Insulation

Proper Attic Insulation

As the days begin to warm, your equipment starts to work more frequently, and the purchasing of material increases, there grows a responsibility to the material components. There are two core aspects to properly maintaining the PMDI (ISO) and Polyol components of spray foam insulation, Processing and Storage. There is no single constant for all types of material, but there are some general guidelines and recommendations that can be applied to most types of SPF insulation.

Material Storage

PMDIs, the A-component, and Polyols, the B-component, are complex materials that need to be stored properly, especially during the warm months of summer. Common temperatures for storage typically start around 60oF to 70oF and top off in the vicinity of 100oF. It is ideal to store materials in a well-ventilated and climate controlled area, yet not everyone has accessibility to such a facility. Knowing your specific manufacturer's recommended storage temperatures and watching for the bowing of drums are vital to ensuring the proper performance of your product when you begin to process and apply it.

On the material side, the physical drum temperature and preparation of the material are key steps in a successful application. Many open cell spray foams require a process of agitation and/or recirculation before any spraying begins. Drum temperatures need to be maintained at the manufacturer's recommended levels, which typically land around 75oF. Proper drum temperature is one of the factors in producing quality, high yielding spray foam.

Always consult with your manufacturer before spraying any SPF products to make sure all recommended pressures, temperatures, settings, and other conditions are met.

Your Home's Insulation

Types Of Attic Insulation

What is Spray Foam Insulation?:

It's a form of insulation, which is sprayed over an area you wish to insulate, instead of the conventional way of placing some sort of insulation in the wall cavity. When it is sprayed it rapidly expands and fills in every single void it can, creating an almost perfectly sealed space.

What are the advantages of using Spray Foam Insulation?:

By expanding and filling ever crack and void it provides complete sealing, preventing air from leaking, which is still in effect with other insulations. It can be placed in any area without having to remove existing tubing, electrical wires or pipes of any kind. It is water repellent and allows moisture to leave from the walls. Mold cannot grow on it. It also prevents the development of mold, which is due to humid air. It is an effective way of reducing outside noises. Also, Spray Foam Insulation has a low flammability. It can be used as an effective way of insulating your boat. It can be used in small areas.

Is it environmentally friendly?:

Many organizations have rated spray foam insulation as one of the greenest methods of insulation with the most attention going to icynene. Most spray foam insulations do not contain HCFC's, CFC's or formaldehyde. They are relatively safe for individuals with respiratory problems such as asthma. So the answer to the question is yes it is environmentally friendly.

 


HomePage

Attic Insulation Companies Toronto, Ontario |

Most of the energy costs spent to keep a Toronto home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?

Are You Trying To Find Ceiling Insulation Contractor For Your Toronto House?

Although spray foam insulation as we know it today truly emerged in the 1980s around the Toronto area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.

Attic Insulation

Home Insulation Options

Spray Foam Insulation is a two-component system typically consisting of petroleum oils, plastics, and resins. The polyurethane foam comes in two different forms, open cell and closed cell foam. The polyurethane spray foam is an extremely versatile material that is available in a variety of final physical properties and densities. Although the two types of foam are very similar in their chemical structures their characteristics and capabilities differ in many ways, which makes it necessary for the user to understand the differences of the two materials so he or she can determine which is the right foam for their particular application.

The open cell spray foam insulation contains a density of 0.5lb. per cubic foot. The greater the density of the foam the heavier, or stronger it will become. This particular type of polyurethane foam is referred to as "Open Cell" because of the nature of the chemical reaction during the installation process. When the polyurethane foam is being applied the tiny cells of the foam are broken causing air to fill the "open" space inside the material, resulting in a soft or spongy material. The open cell foam carries an R-Value of 5 to 5.5 per inch (R-Value is the measure of thermal resistance, which can be found by identifying the ratio of the temperature difference across an insulator and the heat flux). 0.5lb. foam products use significantly less material than 2lb. foam products do when completing the same sized job, making them attractive to an individual concerned with conserving the foam material. Due to the fact that open cell foam requires less material, the cost of the project is much cheaper than it would be if you were to apply closed cell foam. Although, Open cell foam is an efficient and economical product it contains some disadvantages in regards to closed cell foam. One of the open cells disadvantages is it has a lower R-Valuer per square inch than closed cell foam does and open cell foam is vapor permeable requiring it to be covered with a vapor retardant material. Although, open cell foam has some advantages and disadvantages it has been recognized as an excellent insulator, air sealant and sound barrier.

There are many things a home or building owner should take into consideration when considering the type of foam that should be used for their particular application. Although both types of foam are by far the best insulators on the market, each type of polyurethane foam possess its own characteristics and capabilities. It is imperative for the user to identify which foam is right for them before applying the product.

How Much Attic Insulation is Enough?

Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.

Home Insulation Options

As the days begin to warm, your equipment starts to work more frequently, and the purchasing of material increases, there grows a responsibility to the material components. There are two core aspects to properly maintaining the PMDI (ISO) and Polyol components of spray foam insulation, Processing and Storage. There is no single constant for all types of material, but there are some general guidelines and recommendations that can be applied to most types of SPF insulation.

Material Storage

PMDIs, the A-component, and Polyols, the B-component, are complex materials that need to be stored properly, especially during the warm months of summer. Common temperatures for storage typically start around 60oF to 70oF and top off in the vicinity of 100oF. It is ideal to store materials in a well-ventilated and climate controlled area, yet not everyone has accessibility to such a facility. Knowing your specific manufacturer's recommended storage temperatures and watching for the bowing of drums are vital to ensuring the proper performance of your product when you begin to process and apply it.

On the material side, the physical drum temperature and preparation of the material are key steps in a successful application. Many open cell spray foams require a process of agitation and/or recirculation before any spraying begins. Drum temperatures need to be maintained at the manufacturer's recommended levels, which typically land around 75oF. Proper drum temperature is one of the factors in producing quality, high yielding spray foam.

Always consult with your manufacturer before spraying any SPF products to make sure all recommended pressures, temperatures, settings, and other conditions are met.


http://cozyguyyz.pro/toronto/

Ceiling Insulation Contractor Services By CozyGuYYZ