Garage Insulation Company Golden Mile, Ontario |

Most of the energy costs spent to keep a Golden Mile home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?

Are You Trying To Find Insulation Removal Company For Your Golden Mile House?

Although spray foam insulation as we know it today truly emerged in the 1980s around the Golden Mile area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.

Green Home Insulation

Best Home Insulation Options

The main area of a home that can let in air from outside into your home is your attic. This is also the main place where insects and animals can infest without you noticing before it is too late. The best to prevent both of these problems is to have the proper sealing done in your attic. This will mainly involve insulating the entire area properly with the most advanced method of insulation that is available right now. The following is the best option of insulation for any type house that has an attic:

Foam insulation is a new type of insulation that many builders and homeowners alike are beginning to use in replacement of lay-in insulation. Instead of stapling pieces of fiberglass-based traditional insulation, this type is completely sprayed onto the area which guarantees complete coverage. This is also very helpful when it comes to tight spaces that are hard to get to.

If your home does not already have this revolutionary type of product in place up in your attic you should call your trusted insulation experts to schedule an appointment to review the job. It will keep your energy costs down and it will make your home last much longer.

Home Insulation - Is It Cold Outside?

Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.

Price To Insulate Attic

An energy efficient home is an environmentally sound home and to achieve energy efficiency insulation is vital. It must be used liberally, and it must be properly installed. There are all sorts of insulating materials, and their green credentials may vary.

The most common is Pink fiberglass Batts which are by no means the worst from an environmental perspective but they aren't the best either. Fiberglass itself is chemically inert, but the glues and backing materials that provide structure to the batts can release dangerous fumes and there is some concern that minute particles of fiberglass can filter into living spaces, presenting a health risk. Rigid polystyrene panels, another popular choice, are made from petrochemicals which are flammable and emit toxic fumes when burned.

Misconceptions about Cellulose:

1: Prone to mold and insects; Cellulose Fiber is treated with two non-irritant, non-toxic, safe to handle allergy free agents; Borax and Boric acid which make it vermin resistant.

2: Fire retardant chemicals disappear in 5 years; The most exhaustive study and technical literature review concluded it would take 300 years to do so and only under continuous harsh conditions of 100% relative humidity and 70 degrees Celsius.

For information on environmentally friendly cellulose, go to www.premiuminstallation.com.au.


http://cozyguyyz.pro/toronto/

Insulation Removal Company Services By CozyGuYYZ

 

House Insulation Contractor Golden Mile, Ontario |

Most of the energy costs spent to keep a Golden Mile home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?

Are You Trying To Find Home Insulation Contractor For Your Golden Mile House?

Although spray foam insulation as we know it today truly emerged in the 1980s around the Golden Mile area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.

Home Insulation - Is It Cold Outside?

Proper Way To Insulate Attic

An energy efficient home is an environmentally sound home and to achieve energy efficiency insulation is vital. It must be used liberally, and it must be properly installed. There are all sorts of insulating materials, and their green credentials may vary.

The most common is Pink fiberglass Batts which are by no means the worst from an environmental perspective but they aren't the best either. Fiberglass itself is chemically inert, but the glues and backing materials that provide structure to the batts can release dangerous fumes and there is some concern that minute particles of fiberglass can filter into living spaces, presenting a health risk. Rigid polystyrene panels, another popular choice, are made from petrochemicals which are flammable and emit toxic fumes when burned.

Misconceptions about Cellulose:

1: Prone to mold and insects; Cellulose Fiber is treated with two non-irritant, non-toxic, safe to handle allergy free agents; Borax and Boric acid which make it vermin resistant.

2: Fire retardant chemicals disappear in 5 years; The most exhaustive study and technical literature review concluded it would take 300 years to do so and only under continuous harsh conditions of 100% relative humidity and 70 degrees Celsius.

For information on environmentally friendly cellulose, go to www.premiuminstallation.com.au.

Spray Foam Equipment That You Will Need

Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.

Best Home Insulation Options

Home Insulation

- With the cold season upon us, we thought it is important to write about insulation in the home. It's something that most people never give any thought to, but hidden in the walls of your home is an added layer of protection from the outdoor elements. One recent report by the North American Insulation Manufacturers Association stated that approximately 90 percent of all existing homes lack enough insulation. Jonathan Levy, a professor of Environmental Health at Boston University School of Public Health stated, "If all U.S. homes were fitted with insulation based on the 2012 International Energy Conservation Code (IECC), residential electricity use nationwide would drop by about 5% and natural gas use by more than 10%."

Choosing the right type of insulation for your home will depend on your local climate, home design, how it is used and your budget. If you have an attic, crawlspace or basement, then adding additional insulation to the space can be a cost-effective way to save more on your energy bills.

Types of Insulation

While there are a variety of materials that insulation can be made from, it typically is available in four different types:

Foam-in-Place: Foam-in-place is an easy do-it-yourself project for homeowners that can be done with a small pressurized can. It is typically used to fill in small holes and cracks around door frames, windows, plumbing or electrical.

Loose-Fill: Loose-fill is primarily made up of rock wool, fiberglass or cellulose that are in the form of fiber pellets or loose fibers. Special pneumatic equipment is utilized to blow the loose-fill insulation into place.

Rigid Foam: Typically the most expensive of all insulation types, rigid foam can be an effective option and also provides greater insulation. This type of insulation is most commonly used for special applications as well as interior or exterior wall sheathing.

Rolls and Batts: Also known as blankets. This type of insulation is made from mineral fibers and is available in sizes that fit the standard spacing of wall studs, attic joists or floor joists.

What is the R-Value?

The R-value is a measurement to determine the insulation's resistance to heat flow. The recommended 'R-value' will vary from one home to the next as climates and heating/cooling systems differ. R-values range from zero to forty (sometimes even higher). The higher that the R-value is, the greater the insulating effectiveness it provides. The United States Department of Energy estimates that nearly half of a typical home's utility bills are spent on cooling and heating. Ensuring that air is not leaking into your home through windows, doors and other openings can significantly help cut costs on utilities. Additional benefits of a well-insulated home include better humidity control, less dust, pollen and insects as well as noise reduction. When all of the gaps, leaks and holes are added together in a typical home's envelope, it is the equivalent of having a window open each day of the year. If you are curious about how much insulation your home needs you can look it up on the U.S. Department of Energy Recommended Total R-Values for New Wood-Framed Houses here (http://www.energy.gov/energysaver/tips-insulation). Additionally, if you have an attic in your home, you may be able to save more money on energy bills. The U.S. Department of Energy estimates that between 10 to 50 percent can be saved off of a heating bill just by having a properly insulated attic. It's worth having a professional insulation company come and look at your home to make sure that it does have the proper insulation needed. Energy auditors can also perform this task as well as provide you with other great tips to save energy. With the cold season rolling in take the time to make sure your home has the correct insulation.


http://cozyguyyz.pro/scarborough/

Home Insulation Contractor Services By CozyGuYYZ