The main area of a home in Etobicoke that can let in air from outside into your home is your attic. This is also the main place where insects and animals can infest without you noticing before it is too late. The best to prevent both of these problems is to have the proper sealing done in your attic. This will mainly involve insulating the entire area properly with the most advanced method of insulation that is available right now. The following is the best option of insulation for any type house that has an attic:
CozyGuYYZ: Professional Home Insulation Contractors In Etobicoke
Foam insulation is a new type of insulation being used a lot in Etobicoke that many builders and homeowners alike are beginning to use in replacement of lay-in insulation. Instead of stapling pieces of fiberglass-based traditional insulation, this type is completely sprayed onto the area which guarantees complete coverage. This is also very helpful when it comes to tight spaces that are hard to get to.
A small science lesson about insulation:
Heat moves from warmer areas to colder areas. This is the single basic principle on which the idea of insulation is based. On hot days heat tries to get inside your house and on cold days the heat tries to escape. Insulation seeks to minimise this ebb and flow of temperature by slowing the process.
Unfortunately no matter how good your home insulation is, any building always needs a constant supply from a heat generating source to maintain a steady temperature. Of course however, if you have good insulation then you will need much less heat and thus a lot less energy to achieve the same effect.
Most of us learned in GCSE science about conduction convection and radiation.
Here is a brief summary of each to refresh every ones memory.
o Distance between surfaces
o The emissive of the surfaces (shiny and light/matt and dark)
o Temperature differences between receiving and radiating surfaces
The application of thermal insulation does not have the effect of generating heat in your house. It is still always the rule that you will have to supply heat from an inside source. There may be a rise in temperature inside the building after the installation of insulation but that will be down to the better performance and energy saving properties of better house insulation.
Is Spray on Foam Insulation Worth the Extra Cost?
Spray Foam Insulation is a two-component system typically consisting of petroleum oils, plastics, and resins. The polyurethane foam comes in two different forms, open cell and closed cell foam. The polyurethane spray foam is an extremely versatile material that is available in a variety of final physical properties and densities. Although the two types of foam are very similar in their chemical structures their characteristics and capabilities differ in many ways, which makes it necessary for the user to understand the differences of the two materials so he or she can determine which is the right foam for their particular application.
The open cell spray foam insulation contains a density of 0.5lb. per cubic foot. The greater the density of the foam the heavier, or stronger it will become. This particular type of polyurethane foam is referred to as "Open Cell" because of the nature of the chemical reaction during the installation process. When the polyurethane foam is being applied the tiny cells of the foam are broken causing air to fill the "open" space inside the material, resulting in a soft or spongy material. The open cell foam carries an R-Value of 5 to 5.5 per inch (R-Value is the measure of thermal resistance, which can be found by identifying the ratio of the temperature difference across an insulator and the heat flux). 0.5lb. foam products use significantly less material than 2lb. foam products do when completing the same sized job, making them attractive to an individual concerned with conserving the foam material. Due to the fact that open cell foam requires less material, the cost of the project is much cheaper than it would be if you were to apply closed cell foam. Although, Open cell foam is an efficient and economical product it contains some disadvantages in regards to closed cell foam. One of the open cells disadvantages is it has a lower R-Valuer per square inch than closed cell foam does and open cell foam is vapor permeable requiring it to be covered with a vapor retardant material. Although, open cell foam has some advantages and disadvantages it has been recognized as an excellent insulator, air sealant and sound barrier.
There are many things a home or building owner should take into consideration when considering the type of foam that should be used for their particular application. Although both types of foam are by far the best insulators on the market, each type of polyurethane foam possess its own characteristics and capabilities. It is imperative for the user to identify which foam is right for them before applying the product.
- Crawl Space Insulation Contractors Etobicoke, Ontario |
- House Insulation Contractors Smithfield, Ontario |
- Roof Insulation Company Rexdale, Ontario |
- Interior Wall Insulation Contractors Islington, Ontario |
- Loft Insulation Contractor Mimico, Ontario |
- Exterior Wall Insulation Contractors Long Branch, Ontario |
- Basement Insulation Companies Markland Wood, Ontario |
- Loft Insulation Company Eatonville, Ontario |
- Basement Wall Insulation Companies Sunnylea, Ontario |
- Roof Insulation Contractor Humber Bay, Ontario |
- Loft Insulation Contractors Richview, Ontario |
- Garage Insulation Contractor Eringate, Ontario |
- Garage Insulation Company West Deane, Ontario |