Scarborough Cavity Wall Insulation Company

The main area of a home in Scarborough  that can let in air from outside into your home is your attic. This is also the main place where insects and animals can infest without you noticing before it is too late. The best to prevent both of these problems is to have the proper sealing done in your attic. This will mainly involve insulating the entire area properly with the most advanced method of insulation that is available right now. The following is the best option of insulation for any type house that has an attic:

Insulating Attic Walls

CozyGuYYZ: Professional Insulation Replacement Contractor In Scarborough

Foam insulation is a new type of insulation being used a lot in Scarborough  that many builders and homeowners alike are beginning to use in replacement of lay-in insulation. Instead of stapling pieces of fiberglass-based traditional insulation, this type is completely sprayed onto the area which guarantees complete coverage. This is also very helpful when it comes to tight spaces that are hard to get to.

Your Home's Insulation

Best Insulation For New Homes

Home Insulation

- With the cold season upon us, we thought it is important to write about insulation in the home. It's something that most people never give any thought to, but hidden in the walls of your home is an added layer of protection from the outdoor elements. One recent report by the North American Insulation Manufacturers Association stated that approximately 90 percent of all existing homes lack enough insulation. Jonathan Levy, a professor of Environmental Health at Boston University School of Public Health stated, "If all U.S. homes were fitted with insulation based on the 2012 International Energy Conservation Code (IECC), residential electricity use nationwide would drop by about 5% and natural gas use by more than 10%."

Choosing the right type of insulation for your home will depend on your local climate, home design, how it is used and your budget. If you have an attic, crawlspace or basement, then adding additional insulation to the space can be a cost-effective way to save more on your energy bills.

Types of Insulation

While there are a variety of materials that insulation can be made from, it typically is available in four different types:

Foam-in-Place: Foam-in-place is an easy do-it-yourself project for homeowners that can be done with a small pressurized can. It is typically used to fill in small holes and cracks around door frames, windows, plumbing or electrical.

Loose-Fill: Loose-fill is primarily made up of rock wool, fiberglass or cellulose that are in the form of fiber pellets or loose fibers. Special pneumatic equipment is utilized to blow the loose-fill insulation into place.

Rigid Foam: Typically the most expensive of all insulation types, rigid foam can be an effective option and also provides greater insulation. This type of insulation is most commonly used for special applications as well as interior or exterior wall sheathing.

Rolls and Batts: Also known as blankets. This type of insulation is made from mineral fibers and is available in sizes that fit the standard spacing of wall studs, attic joists or floor joists.

What is the R-Value?

The R-value is a measurement to determine the insulation's resistance to heat flow. The recommended 'R-value' will vary from one home to the next as climates and heating/cooling systems differ. R-values range from zero to forty (sometimes even higher). The higher that the R-value is, the greater the insulating effectiveness it provides. The United States Department of Energy estimates that nearly half of a typical home's utility bills are spent on cooling and heating. Ensuring that air is not leaking into your home through windows, doors and other openings can significantly help cut costs on utilities. Additional benefits of a well-insulated home include better humidity control, less dust, pollen and insects as well as noise reduction. When all of the gaps, leaks and holes are added together in a typical home's envelope, it is the equivalent of having a window open each day of the year. If you are curious about how much insulation your home needs you can look it up on the U.S. Department of Energy Recommended Total R-Values for New Wood-Framed Houses here (http://www.energy.gov/energysaver/tips-insulation). Additionally, if you have an attic in your home, you may be able to save more money on energy bills. The U.S. Department of Energy estimates that between 10 to 50 percent can be saved off of a heating bill just by having a properly insulated attic. It's worth having a professional insulation company come and look at your home to make sure that it does have the proper insulation needed. Energy auditors can also perform this task as well as provide you with other great tips to save energy. With the cold season rolling in take the time to make sure your home has the correct insulation.

The History of Spray Foam Insulation

Crawl Space Insulation Installation

If you are in the process of building a new home or renovating your existing home then finding the ideal insulation is one of the decisions that you will have to make. There are several options available to you. Some products are more affordable in the short term but don't always provide the best long-term insulation solution. Other products may be more expensive to purchase but can save you hundreds of dollars on your utility bills over time. It is useful to compare and understand the different types of insulation so you can make an informed decision that will benefit you in the long run.

What Is Spray Foam Insulation?

Spray foam is a product that has been around for some time. It is one of the more efficient home insulators and available in a variety of types to suit different applications. It is made up of at least two compounds. Independently, the components can be stored for a relatively long period of time; however, when the compounds are mixed, they react and form foam that needs to be applied immediately. The foam is sprayed on to a surface area and after a short period of time, it sets and hardens. The result is an effective insulating layer that is highly durable.

How Can You Install Spray Foam in Your Home?

Spray foam can be installed by a professional contractor. This is usually done in a new building or when you are doing extensive renovations. However, the good news is that there are also home kits available for those who like DIY home repairs. The easy-to-follow instructions take you through the process so you can easily insulate your home using this product.

 


HomePage

Loft Insulation Contractors Scarborough, Ontario |

Most of the energy costs spent to keep a Scarborough home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?

Are You Trying To Find New Home Insulation Contractor For Your Scarborough House?

Although spray foam insulation as we know it today truly emerged in the 1980s around the Scarborough area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.

Spray Foam Equipment That You Will Need

Insulation Under House Cost

What is Spray Foam Insulation?:

It's a form of insulation, which is sprayed over an area you wish to insulate, instead of the conventional way of placing some sort of insulation in the wall cavity. When it is sprayed it rapidly expands and fills in every single void it can, creating an almost perfectly sealed space.

What are the advantages of using Spray Foam Insulation?:

By expanding and filling ever crack and void it provides complete sealing, preventing air from leaking, which is still in effect with other insulations. It can be placed in any area without having to remove existing tubing, electrical wires or pipes of any kind. It is water repellent and allows moisture to leave from the walls. Mold cannot grow on it. It also prevents the development of mold, which is due to humid air. It is an effective way of reducing outside noises. Also, Spray Foam Insulation has a low flammability. It can be used as an effective way of insulating your boat. It can be used in small areas.

Is it environmentally friendly?:

Many organizations have rated spray foam insulation as one of the greenest methods of insulation with the most attention going to icynene. Most spray foam insulations do not contain HCFC's, CFC's or formaldehyde. They are relatively safe for individuals with respiratory problems such as asthma. So the answer to the question is yes it is environmentally friendly.

Icynene Insulation

Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.

Best Building Insulation

Scenario:

I have just completed an addition to my house. I've heard that blown in insulation is better than batts since covers the joists completely and leaves no open areas. Do you have any do it yourself suggestions?

Solution:

Yes you are correct. Blown in insulation is better that batts when installed properly as it does seal the attic better.

First you need to measure your attic area that you plan on insulating. Most attics require a value of R-30, R-38 or R-49, depending on your climate and location. Once you know the square footage of your attic you can determine how much insulation you'll need by simple looking on the chart located on the bag of insulation.

Before you get started you will need to determine what materials you will need. Assuming your home has recessed lights, ceiling and bathroom fans and eave vents you will need the following tools and materials:

Loose Fill Insulation

Cardboard Baffles

Flashing

Duct Tape

Staple Hammer and Staples

Utility Knife

Ladder

Insulation Blowing Machine (Available at your local rental store)

I've found blowing insulation into the attic is a simple process. Start and the far ends of the attic. Going back and forth make sure its level and smooth. Make sure to get all areas of the attic and don't fill any vents or recessed light areas. Take a tape measure with you and check the levels once in a while. As an example, if your installing an R-38 of fiberglass insulation you would want it to measure 16 inches deep. As you work your way back near the attic access make sure your helper is getting that excess hose out of the way. When you get to about 6 feet from the access hole stop the machine so you can get on the ladder. Once on the ladder finish installing, making sure to bring the level evenly against the dam you previously built.

The final step is to place a piece of batt insulation in the access hole and carefully put the attic hole lid back into place. Now your done! Stay out of that attic as much as possible from this point as loose fill insulation that has been stepped on or crushed looses it's R value.


http://cozyguyyz.pro/scarborough/

New Home Insulation Contractor Services By CozyGuYYZ