Etobicoke Loft Insulation Contractors

The main area of a home in Etobicoke  that can let in air from outside into your home is your attic. This is also the main place where insects and animals can infest without you noticing before it is too late. The best to prevent both of these problems is to have the proper sealing done in your attic. This will mainly involve insulating the entire area properly with the most advanced method of insulation that is available right now. The following is the best option of insulation for any type house that has an attic:

Insulating Attic Walls

CozyGuYYZ: Professional Home Insulation Contractors In Etobicoke

Foam insulation is a new type of insulation being used a lot in Etobicoke  that many builders and homeowners alike are beginning to use in replacement of lay-in insulation. Instead of stapling pieces of fiberglass-based traditional insulation, this type is completely sprayed onto the area which guarantees complete coverage. This is also very helpful when it comes to tight spaces that are hard to get to.

Green Home Insulation

Insulate My House

An energy efficient home is an environmentally sound home and to achieve energy efficiency insulation is vital. It must be used liberally, and it must be properly installed. There are all sorts of insulating materials, and their green credentials may vary.

The most common is Pink fiberglass Batts which are by no means the worst from an environmental perspective but they aren't the best either. Fiberglass itself is chemically inert, but the glues and backing materials that provide structure to the batts can release dangerous fumes and there is some concern that minute particles of fiberglass can filter into living spaces, presenting a health risk. Rigid polystyrene panels, another popular choice, are made from petrochemicals which are flammable and emit toxic fumes when burned.

Misconceptions about Cellulose:

1: Prone to mold and insects; Cellulose Fiber is treated with two non-irritant, non-toxic, safe to handle allergy free agents; Borax and Boric acid which make it vermin resistant.

2: Fire retardant chemicals disappear in 5 years; The most exhaustive study and technical literature review concluded it would take 300 years to do so and only under continuous harsh conditions of 100% relative humidity and 70 degrees Celsius.

For information on environmentally friendly cellulose, go to www.premiuminstallation.com.au.

Polyurethane Foam Insulation Kits For Homeowners

Home Insulation Options

Scenario:

I have just completed an addition to my house. I've heard that blown in insulation is better than batts since covers the joists completely and leaves no open areas. Do you have any do it yourself suggestions?

Solution:

Yes you are correct. Blown in insulation is better that batts when installed properly as it does seal the attic better.

First you need to measure your attic area that you plan on insulating. Most attics require a value of R-30, R-38 or R-49, depending on your climate and location. Once you know the square footage of your attic you can determine how much insulation you'll need by simple looking on the chart located on the bag of insulation.

Before you get started you will need to determine what materials you will need. Assuming your home has recessed lights, ceiling and bathroom fans and eave vents you will need the following tools and materials:

Loose Fill Insulation

Cardboard Baffles

Flashing

Duct Tape

Staple Hammer and Staples

Utility Knife

Ladder

Insulation Blowing Machine (Available at your local rental store)

I've found blowing insulation into the attic is a simple process. Start and the far ends of the attic. Going back and forth make sure its level and smooth. Make sure to get all areas of the attic and don't fill any vents or recessed light areas. Take a tape measure with you and check the levels once in a while. As an example, if your installing an R-38 of fiberglass insulation you would want it to measure 16 inches deep. As you work your way back near the attic access make sure your helper is getting that excess hose out of the way. When you get to about 6 feet from the access hole stop the machine so you can get on the ladder. Once on the ladder finish installing, making sure to bring the level evenly against the dam you previously built.

The final step is to place a piece of batt insulation in the access hole and carefully put the attic hole lid back into place. Now your done! Stay out of that attic as much as possible from this point as loose fill insulation that has been stepped on or crushed looses it's R value.

 


HomePage

Crawl Space Insulation Contractors Etobicoke, Ontario |

Most of the energy costs spent to keep a Etobicoke home warm in the winter and cool in the summer end up leaving through the attic. In the summer, the sun’s heat pours in through the attic and in the winter, warm air rises past the ceiling and out of the home. Saving on energy costs starts in the attic, but how much insulation is enough?

Are You Trying To Find Loft Insulation Contractor For Your Etobicoke House?

Although spray foam insulation as we know it today truly emerged in the 1980s around the Etobicoke area, spray foam actually has its roots several decades further in the past, beginning with the development of polyurethane foam in the 1940s by Otto Bayer. Otto Bayer, an industrial chemist, actually began working with polyurethane in Germany during the late 1930s. This technology was brought to the United States in the early 1940s by David Eynon, the president of Mobay, a war effort conglomerate created from the partnering of two chemical industry giants, Monsanto and the Bayer Corporation.

The History of Spray Foam Insulation

The Best Attic Insulation

Each and every home needs proper insulation, this is a fact. Fortunately, these days, it is a lot easier to find the proper material that would best fit the home's specific needs. After all, every house differs in terms of layout and need for heating. But first, let's talk about insulation. If your home is properly insulated, the heat flow to and out of your home is greatly reduced. This means that you need not use up too much energy in the colder months just to keep your home warm. Insulation is added to various areas in your home such as in between walls and even floors in order to make this happen. Of course, the material used also plays quite a significant role in making sure that the heat does not escape and as such, choosing the right one for your house is imperative.

2. Foam boards or rigid foam - These are commonly used to insulate the house's foundation because of the fact that it is resistant to water.

3. Liquid foam - A thin layer of this would be spread onto a wall and the left to expand and fill the cavity where it was applied before anything can be added on top.

So there you have it, the top 3 most common insulation materials for your home.

Polyurethane Foam Insulation Kits For Homeowners

Movement of air in and out of a home can be a leading cause of escalated energy bills. Air can enter your house through holes, cracks and crevices. You can stop unconditioned air from entering your home and indoor conditioned air from escaping outside by adding an advanced insulation system to achieve optimal building performance.

Best Way To Insulate House Walls

With summer knocking on the door, it is quite common that homeowners start looking at options to reduce their air conditioning bills. One terrific way of achieving it is to install the spray polyurethane foam (SPF). This insulation offers numerous other advantages like reduced air infiltration which not only lowers energy costs but also improves indoor comfort. However, for it, the house-owners must work in close collaboration with the spray foam insulation specialists to fully understand the product and its implications. The choice of the specialist is also very important here. Below mentioned are some questions which would help you nail the right specialist -

  1. How long have you been in business?
The company that you choose must always be of 6-7 years old and preferably over ten years old. The reason for this is quite simple. Often spray foam insulation start showing problems when they get 4 or 5 years old. Any manufacturer offers warranties for the material cost. Many companies make the mistake of using foam based on price. After 4 to 5 years, they suddenly find an increasing number of customers wanting them to fix their problems. This makes them shut down their business and disappear. Going for a decade old company assures you that they would be giving you quality material and service and would always honor their guarantee.

  1. How often do you work in this area?
Most unreliable spray foam contractors tend to move from state to state in search of jobs. They always hire cheap labor and take up large jobs with low bids. When you contact them with problems, they will put forward a trip charge to resolve the issue. This would prove both inconvenient and expensive. It's best not to go forward with them.

  1. What type of warranty do you offer and what does it cover?
You would obviously want a company that takes full ownership of both the materials and the service and does not let you shoulder the responsibility for mistakes that you have not committed. Thus, it's best to go for a company that offers a lifelong guarantee on materials as well as the labor.

http://cozyguyyz.pro/etobicoke/

Loft Insulation Contractor Services By CozyGuYYZ